3.6/6kV~26/35kV Cross-Linked Polyethylene Insulated & Flame Retarding Power Cable

3.6/6kV~26/35kV Cross-Linked Polyethylene Insulated &

Flame Retarding Power Cable

Uses:
The product is suitable to be used for electrical distribution and supply of transmission line with power frequency rated voltage 3.6/6kV~26/35kV. And 900C is the allowable highest long-term operating temperature of cable conductor; the highest temperature of cable conductor can't be above 2500C when short circuit occurs.

Model Number and Product Name:

Type	Model Number	Product Name
Flame Retarding Power Cable	ZRA-YJV ZRB-YJV ZR(C )-YJV	Copper-Core Cross-Linked Polyethylene Insulated & PVC Sheathed Flame Retarding Power Cable
	ZRA-YJLV ZRB-YJLV ZR(C )-YJLV	Aluminum-Core Cross-Linked Polyethylene Insulated & PVC Sheathed Flame Retarding Power Cable
	ZRA-YJV22 ZRB-YJV22 ZR(C )-YJV22	Copper-Core Cross-Linked Polyethylene Insulated & Steel-Tape Armored & PVC Sheathed Flame Retarding Power Cable
	ZRA-YJLV22 ZRB-YJLV22 ZR(C )-YJLV22	Aluminum-Core Cross-Linked Polyethylene Insulated & Steel-Tape Armored & PVC Sheathed Flame Retarding Power Cable
	ZRA-YJV32 ZRB-YJV32 ZR(C )-YJV32	Copper-Core Cross-Linked Polyethylene Insulated & Thin Steel-Wire Armored & PVC Sheathed Flame Retarding Power Cable
	ZRA-YJLV32 ZRB-YJLV32 ZR(C )-YJLV32	Aluminum-Core Cross-Linked Polyethylene Insulated & Thin Steel-Wire Armored & PVC Sheathed Flame Retarding Power Cable
Halogen-Free & Low-Fume Flame Retarding Power Cable	WDZA-YJY WDZA-YJLY	Copper-Core (Aluminum-Core) Cross-Linked Polyethylene Insulated & Polyethylene Sheathed Halogen-Free & Low-Fume Flame Retarding Power Cable
	WDZB-YJY23 WDZB-YJLY23	Copper-Core (Aluminum-Core) Cross-Linked Polyethylene Insulated & Steel-Tape Armored & Polyethylene Sheathed Halogen-Free & Low-Fume Flame Retarding Power Cable
	WDZC-YJY33 WDZC-YJLY33	Copper-Core (Aluminum-Core) Cross-Linked Polyethylene Insulated & Thin Steel-Wire Armored & Polyethylene Sheathed Halogen-Free & Low-Fume Flame Retarding Power Cable

Selection of Rated Voltage of Cable:

If the rated voltage of cable is appropriate with the operation-state of cable-linking system, “U0/U (Um)” are indicated, all of them are effective values with application unit “kV”.
U0– rated power frequency voltage between ground cable conductor and metal screening material;
U- rated power frequency voltage between conductors of cable;
Um- the biggest value of the highest system-voltage of working cable.

Three-phase system-used rated voltage of cable as follows:

U	Um	U0
U	Um	Category-I Cable	Category-II Cable
3	3.6	1.8	3.6
6	7.2	3.6	6
10	12	6	8.7
15	17.5	8.7	12
20	24	12	18
35	42	21	26

Note: Category-I------ used for single-phase ground connection, and the fault time of system is not over 1min each time and the longest one not over 8 hours, the total fault occurring hours of the system not over 125 hours every year.
Category-II------used for the system with longer time of ground connection fault and also adopted for the places required for relative high insulation performance of cable.

Performance Characteristics:
DC resistance and insulation resistance of cable conductor is in conformity to the following list:

Nominal Cross Section mm2	200C DC ResistanceΩ/km ≤
Nominal Cross Section mm2	Copper	Aluminum
25	0.727	1.20
35	0.524	0.868
50	0.387	0.641
70	0.263	0.443
95	0.193	0.320
120	0.153	0.253
150	0.124	0.206
185	0.0991	0.164
240	0.0754	0.125
300	0.0601	0.100
400	0.0470	0.778
500	0.0366	0.0603
630	0.0283	0.0469
800	0.0221	0.0367

The self-discharge test with power frequency voltage of finished cable is in conformity to the following list:

No	Item for Test	Rated Voltage kV for Cable
No	Item for Test	3.6/6	6/6 6/10	8.7/10 8.7/15	12/20	18/20 18/30	21/35	26/35
1	AC Voltage of Power Frequency?? kV/5min	12.5	21	30.5	42	63	73.5 (53)*	91 (65)*
2	AC Voltage Test kV of Power Frequency for 4 Fours	14.4	24	35	48	72	84	104
3	Shock Voltage Test?? kV	60	75	95	125	170	200	250
4	Self-Discharge Test Biggest Self-Discharge Quantity pC under 1.73 U0	5	5	5	5	5	5	5
*21/35kV and 26/35kV power frequency voltage test for cable can be made following the 2.5 U0 x 30min or 3.5 U0 x 15 min according to the requirements of users.

The flame retarding performance should be in conformity to the requirements of Category-A, B and C specified in the Standard of GB/T18380.3-2001 (same effect as IEC60331).
The halogen-free performance should be in conformity to the requirements specified in the Standard GB/T17650-1998 (same effect as IEC60754).
The low-fume performance should be in conformity to the requirements specified in the Standard of GB/T17651-1998 (same effect as IEC601034).

Main Products

3.6/6kV~26/35kV Cross-Linked Polyethylene Insulated &

Flame Retarding Power Cable